Primary Arms 30mm Red Dot & PA High Rise Mount
Posted by rick cancino on May 21, 2013 in Articles, New Products | 0 comments

So after I had a chance to review Primary Arm’s Micro Dot, I knew I wanted to try their 30mm Red dot on an upcoming build. PA’s 30mm Red dot features a 3moa dot, to compare to Aimpoint who typically uses a 2 or 4 MOA variation.
Even tho I did not plan on putting backup sites on the rifle, I still have a preference to absolute co-witness setups and ordered Primary Arm’s High rise mount.
Here’s the unboxing
Included in the box is:
- Instructions
- 30mm Optic
- Spare replacement batteries (LR44 Button)
- Cleaning Microfiber Cloth
- Rubber Bikini for Caps
Replacement LR44 Button Batteries. The Optic arrives with a set of batteries pre installed in it.
Here’s the Primary Arms High Rise Mount with the Adapter inserts still in place. They allow you to use the mount with a 1″ or 30mm Optic. I removed them to install onto the 30mm PA Optic.
You can see the inserts on the table.
Looking forward to taking the optic out to the range and sighting her in!
You can purchase the 30mm optic and riser mount from Primary Arms
https://www.primaryarms.com/Primary_Arms_30mm_Red_Dot_p/primary-arms-30mm-red-dot.htm